| Attention: Uname: Php: Hdd: Cwd: | Mr.X WSO Webshell! - Personal WEB SHELL Mr.X BYPASS! V2.5 Telegram: @jackleet 5.3.29 Safe mode: OFF Datetime: 2026-04-09 09:56:21 1999.30 GB Free: 74.36 GB (3%) /home/httpd/html/stoptube.com/ drwxr-xr-x [ root ] [ home ] Text | Server IP: 127.0.0.54 Client IP: 216.73.216.53 |
| [ Files ] | [ Logout ] |
|---|
#ifndef _LINUX_TTY_FLAGS_H
#define _LINUX_TTY_FLAGS_H
/*
* Definitions for async_struct (and serial_struct) flags field also
* shared by the tty_port flags structures.
*
* Define ASYNCB_* for convenient use with {test,set,clear}_bit.
*/
#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
* on the callout port */
#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
* autoconfiguration */
#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
* checks. Note: can be dangerous! */
#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
#define ASYNCB_LAST_USER 15
/* Internal flags used only by kernel */
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
#define ASYNCB_CLOSING 27 /* Serial port is closing */
#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
#define ASYNCB_CONS_FLOW 23 /* flow control for console */
#define ASYNCB_FIRST_KERNEL 22
#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
#define ASYNC_SAK (1U << ASYNCB_SAK)
#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
#endif